Beverage Factory – BBQ Grill People

Kegco 24″ Wide Dual Tap Stainless Steel Commercial/Residential Digital Kegerator

Julie — Wed, 14 Jan 2026 06:34:08 +0000

Includes a brand new 5 lb. Aluminum CO2 Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge Two Product CO2 Regulator The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes two 5 foot lengths of 5/16 Inch I.D. Blue Air Line Assembly with Snap Clamps These standard 5 foot lengths of 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes two D system lever handle keg couplers These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
All dispensing accessories are UL recognized components
Converts to a refrigerator with 3 full-width wire shelves
Large enough to hold all full size kegs (including Coors, Miller, and many additional brands)
Holds 1/2 barrels, full size kegs (15.5 gallons), 1/4 barrels, ponies (7.75 gallons), and 1/6 barrels (5 gallons)
Matte black cabinet with stainless steel door
Stainless door has a protective film on it to prevent scratches during shipment; film can be peeled off once the kegerator has been set up
Digital temperature control allows you to adjust the temperature between 32 and 75 degrees Fahrenheit
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
A great choice for dispensing beer, soda, kombucha, and wine
Easy roll casters provide convenient mobility
Removable built-in drip tray with grill collects drips and spills
Chrome guard rail helps prevent mugs and glasses from sliding off
Steel interior floor mat ensures long-lasting durability and allows kegs to glide easily in and out of the cabinet
25% more energy efficient design saves you money each month!
Plugs into standard home outlets
CSA listed to conform to NSF/ANSI 7

This kegerator can fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. PLEASE NOTE: Will not accommodate an "A" system keg.

24″ Wide Single Tap Stainless Steel Commercial/Residential Kegerator

Julie — Wed, 14 Jan 2026 06:34:04 +0000

Includes a brand new 5 lb. Aluminum CO2 Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge CO2 Regulator The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes D system lever handle keg coupler that can tap all domestic kegs This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
All dispensing accessories are UL recognized components
Converts to a refrigerator with 3 full-width wire shelves
Large enough to hold all full size kegs (including Coors, Miller, and many additional brands)
Holds 1/2 barrels, full size kegs (15.5 gallons), 1/4 barrels, ponies (7.75 gallons), and 1/6 barrels (5 gallons)
Matte black cabinet with stainless steel door
Stainless door has a protective film on it to prevent scratches during shipment; film can be peeled off once the kegerator has been set up
Digital temperature control allows you to adjust the temperature between 32 and 75 degrees Fahrenheit
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
A great choice for dispensing beer, soda, kombucha, and wine
Easy roll casters provide convenient mobility
Removable built-in drip tray with grill collects drips and spills
Chrome guard rail helps prevent mugs and glasses from sliding off
Steel interior floor mat ensures long-lasting durability and allows kegs to glide easily in and out of the cabinet
25% more energy efficient design saves you money each month!
Plugs into standard home outlets
CSA listed to conform to NSF/ANSI 7

This kegerator can fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. PLEASE NOTE: Will not accommodate an "A" system keg.

24″ Wide Stainless Steel Digital Kegerator

Julie — Wed, 14 Jan 2026 06:34:01 +0000

MDK-309SS-01 Keg Dispenser and Double-Faucet Draft Beer Dispense System
Includes a brand new 5 lb. Aluminum CO₂ Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO₂ regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge Two Product CO₂ Regulator The regulator works with any CO₂ tank with a CGA-320 valve and measures PSI, as well as the volume of the CO₂ gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes two 5 foot lengths of 5/16 Inch I.D. Blue Air Line Assembly with Snap Clamps These standard 5 foot lengths of 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes two D system lever handle keg couplers These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers to allow you to easily fill tall growlers and pint glasses.
All dispensing accessories are UL recognized components
Converts to refrigerator 2 full-width wire shelves
Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
Matte black cabinet with stainless steel door
Digital temperature control keeps temperature in range of 32°F-75°F
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
An excellent unit for serving kombucha, soda or wine in addition to beer
Deep Chill function to quickly cool down warm keg
Easy roll casters for mobility
Removable built-in drip tray with grill to collect spills
Chrome guard rail to protect your mugs and glasses from sliding off
Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
25% more energy efficient design saves you money each month!
Plugs into standard home outlet
UL Listed

15″ Outdoor Single Tap Stainless Steel Built-In Commercial Kegerator

Julie — Wed, 14 Jan 2026 06:33:40 +0000

Includes a brand new 5 lb. Aluminum CO2 Tank This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge CO2 Regulator The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes D system lever handle keg coupler that can tap all domestic kegs This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
All stainless steel cabinet
Digital temperature control keeps temperature in range of 32°F-72°F (cold enough to dispense and warm enough to ferment)
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Tower extension is provided to bridge the gap between the top of the kegerator and the bottom of the countertop in undercounter applications
LED interior lighting
Security lock
Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
A perfect option for dispensing beer, soda, kombucha or wine
Plugs into standard home outlet

This kegerator can fit one quarter slim keg, one 5 gallon commercial keg or one 5 gallon home brew keg.

15″ Outdoor Glass Door Commercial Beverage Center

Julie — Wed, 14 Jan 2026 06:33:37 +0000

All stainless steel cabinet with stainless steel framed glass door
Soft white LED lighting beautifully illuminates the interior without the heat created by incandescent bulbs
Three wire shelves extend effortlessly for easy access
Internal fans circulate air for even cooling and faster cooldown
Operating Temperature: 32-72°F
Maximum Ambient Temperature: 90°F
Minimum Ambient Temperature: The lowest temperature you want to store your beverages at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Dimensions: 34.1" H x 14.9" W x 23.6" D
Weight: 76.1 lbs.
Please Note: The handle is not attached to the unit during shipping, and will need to be installed when the unit arrives.

This beverage center has 3 adjustable shelves that can hold up to 24 standard 12 oz. cans each and a bottom shelf that can hold up to 16 standard 12 oz. cans for a total storage capacity of 88 standard 12 oz. cans. With a 2-shelf configuration you can also store up to 48 standard beer bottles plus an additional 9 bottles on the bottom for a total capacity of 57 standard beer bottles.

15″ Outdoor All Stainless Steel Commercial Built-In Refrigerator

Julie — Wed, 14 Jan 2026 06:33:33 +0000

All stainless steel cabinet
Soft white LED lighting beautifully illuminates the interior without the heat created by incandescent bulbs
Three wire shelves extend effortlessly for easy access
Internal fans circulate air for even cooling and faster cooldown
Operating Temperature: 32-72°F
Maximum Ambient Temperature: 90°F
Minimum Ambient Temperature: The lowest temperature you want to store your beverages at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Dimensions: 34.1" H x 14.9" W x 23.6" D
Weight: 76.1 lbs.
Please Note: The handle is not attached to the unit during shipping, and will need to be installed when the unit arrives.

24″ Outdoor Two-Drawer All Stainless Steel Commercial Built-In Refrigerator

Julie — Wed, 14 Jan 2026 06:33:21 +0000

Stainless steel construction is more durable, easy-to-clean, and suitable for outdoor use
Front-venting design allows this beverage center to be freestanding or built-in installation
Digital temperature control allows you to accurately set the temperature of your beverage center between 32 and 72 degrees Fahrenheit
4-way adjustable divider to keep your beverages organized and accessible
Removable drawers on ball-bearing slides for thorough deep cleaning
Dimensions: 34.1″H x 23.6″W x 23.6″D

24″ Outdoor All Stainless Steel Commercial Built-In Refrigerator

Julie — Wed, 14 Jan 2026 06:33:13 +0000

Fully-finished cabinet and front-venting design allow this refrigerator to be used built-in or freestanding
Stainless steel exterior makes this unit suitable for outdoor use
Stainless steel interior is more durable than the plastic liner found in most refrigerators
Contain 3 full-width shelves that can be adjusted in 1/2" increments
5.12 cubic foot refrigerator can hold up to 150 standard 12 oz. beverage cans or up to 108 standard beer bottles
Digital temperature control keeps temperature between 32-72 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your items at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
Plugs into standard home outlet

24″ Dual Faucet ADA Built-In Kegerator

Julie — Wed, 14 Jan 2026 06:33:08 +0000

Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved and have a male thread for CO₂ regulators. An average fill is good for 5-6 kegs.
Includes Pro Series Double Gauge CO₂ Regulator with Air Splitter This two product regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ pressure is inside of the kegs. The side gauge measures the remaining volume of CO₂ gas in the tank, so you'll know when it's about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO₂ to one or two kegs at the same pressure, and features a large hand control that makes it easy to adjust the pressure inside of the keg.
Includes two 5 foot lengths of 5/16" I.D. Blue Air Line Assembly with Worm Drive Clamps This standard length of 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with stainless steel worm drive clamps that are easy to install and are resistant to corrosion over time.
Includes two Low Profile "D" System Keg Couplers These low profile 2-3/8" tall couplers are the perfect keg tapping solution for kegerators with limited vertical space. They are compatible with all domestic brand "D" system Sankey kegs and are easy to use - to tap, simply pull out and then down on the lever handle. The couplers feature a nickel-plated forged brass body with a sanitary stainless steel probe, a 1/4" I.D. beer outlet barb, and a 3/8" I.D. gas input barb. A 55-psi pressure relief valve allows over-pressurized gas to escape before it can enter your keg.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
Includes a Draft System Cleaning Kit This kit has been specially designed to help you quickly and easily clean your direct draw system. It includes a one quart shatter proof plastic jar with pump and faucet coupler cleaning attachment, a faucet brush, a faucet wrench, and four 0.5 oz. packets of tap cleaner.
All dispensing accessories are UL recognized components
Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
Holds (1) quarter slim keg or (2) 5 gallon commercial kegs
Sleek black cabinet with stylish stainless steel door
Digital temperature control keeps temperature between 32-50 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
Low 32.5" height is compliant with ADA requirements
Stainless steel interior is more durable than the plastic liner found in most kegerators
Plugs into standard home outlet

24″ Single Faucet ADA Built-In Kegerator

Julie — Wed, 14 Jan 2026 06:32:57 +0000

Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder-coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved and have male thread for CO₂ regulators. An average fill is good for 5-6 kegs.
Includes Pro Series Double Gauge CO₂ Regulator The regulator works with any CO₂ tank with a CGA-320 valve and measures PSI as well as the volume of CO₂ gas left in the cylinder. It has a pressure release valve and a large hand control that makes it easy to adjust the pressure inside of the keg.
Includes 5 feet of 5/16" I.D. Blue Air Line Assembly with Worm Drive Clamps This standard length of 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with stainless steel worm drive clamps that are easy to install and are resistant to corrosion over time.
Includes a Low Profile "D" System Keg Coupler This low profile 2-3/8" tall coupler is the perfect keg tapping solution for kegerators with limited vertical space. It is compatible with all domestic brand "D" system Sankey kegs and is easy to use - to tap, simply pull out and then down on the lever handle. This coupler features a nickel-plated forged brass body with a sanitary stainless steel probe, a 1/4" I.D. beer outlet barb, and a 3/8" I.D. gas input barb. A 55-psi pressure relief valve allows over-pressurized gas to escape before it can enter your keg.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel, and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
Includes a Draft System Cleaning Kit This kit has been specially designed to help you quickly and easily clean your direct draw system. It includes a one quart shatter proof plastic jar with pump and faucet coupler cleaning attachment, a faucet brush, a faucet wrench, and four 0.5 oz. packets of tap cleaner.
All dispensing accessories are UL recognized components
Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
Holds (1) quarter slim keg or (2) 5 gallon commercial kegs
Sleek black cabinet with stylish stainless steel door
Digital temperature control keeps temperature between 32-50 degrees Fahrenheit
Maximum Ambient Temperature: 100 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
Low 32.5" height is compliant with ADA requirements
Stainless steel interior is more durable than the plastic liner found in most kegerators
Plugs into standard home outlet