Free delivery on pellets when you order 5 bags or more, within a 50-mile range!

Due to tariffs changing daily, we may be unable to honor our prices on our website. Please call the office for the correct prices.

24″ Dual Faucet ADA Built-In Kegerator

$1,207.00

SKU HK48BSA-2 Category Brand:
  • Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
    This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs.
  • Includes Pro Series Double Gauge CO2 Regulator with Air Splitter
    This two product regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the kegs. The side gauge measures the remaining volume of CO2 gas in the tank, so you’ll know when it’s about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO2 to one or two kegs at the same pressure, and features a large hand control that makes it easy to adjust the pressure inside of the keg.
  • Includes two 5 foot lengths of 5/16″ I.D. Blue Air Line Assembly with Worm Drive Clamps
    This standard length of 5/16″ I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with stainless steel worm drive clamps that are easy to install and are resistant to corrosion over time.
  • Includes two Low Profile “D” System Keg Couplers
    These low profile 2-3/8″ tall couplers are the perfect keg tapping solution for kegerators with limited vertical space. They are compatible with all domestic brand “D” system Sankey kegs and are easy to use – to tap, simply pull out and then down on the lever handle. The couplers feature a nickel-plated forged brass body with a sanitary stainless steel probe, a 1/4″ I.D. beer outlet barb, and a 3/8″ I.D. gas input barb. A 55-psi pressure relief valve allows over-pressurized gas to escape before it can enter your keg.
  • Includes a Kegco Exclusive 14″ Tall, 3″ Diameter Dual Faucet Polished Stainless Steel Draft Tower
    This NSF-approved tower is a 3″ diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16″ I.D. clear beer tubing. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14″ tall, giving you an extra 2″ of space over standard draft beer towers.
  • Includes a Draft System Cleaning Kit
    This kit has been specially designed to help you quickly and easily clean your direct draw system. It includes a one quart shatter proof plastic jar with pump and faucet coupler cleaning attachment, a faucet brush, a faucet wrench, and four 0.5 oz. packets of tap cleaner.
  • All dispensing accessories are UL recognized components
  • Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2″ increments
  • Holds (1) quarter slim keg or (2) 5 gallon commercial kegs
  • Sleek black cabinet with stylish stainless steel door
  • Digital temperature control keeps temperature between 32-50 degrees Fahrenheit
  • Maximum Ambient Temperature: 100 degrees Fahrenheit
  • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
  • Low 32.5″ height is compliant with ADA requirements
  • Stainless steel interior is more durable than the plastic liner found in most kegerators
  • Plugs into standard home outlet
[cuw_fbt]

X-CLUSIVE premium dispense components include 100% stainless steel beer contact, Pro Series double gauge regulator, corrosion-resistant electric red CO2 tank, and a cleaning kit with cleaner
This undercounter kegerator can be used built-in or freestanding, and features a low 32.5″ height that makes it compliant with ADA requirements
Forced air refrigeration evenly distributes cold air throughout the cabinet so there are no hot spots, and automatic defrost helps ensure easy maintenance
Durable stainless steel interior can hold one quarter slim keg or two 5 gallon kegs, and can be converted into a regular all-refrigerator using the three included adjustable wire shelves
Thanks to its wide 32-50 degree Fahrenheit temperature range, this versatile kegerator can serve beer, wine, kombucha, or coffee at their ideal temperatures

Dimensions: 32-1/2″ H x 23-1/2″ W x 23-1/2″ D

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

OTHER PRODUCTS YOU MAY LIKE

Shopping Cart
24" Dual Faucet ADA Built-In Kegerator24″ Dual Faucet ADA Built-In Kegerator
$1,207.00